|
Viewing Tools and Equipment >> Shop Equipment >> Storage Stainless Steel Tool Top Box Chest - 27 Inch
Considered to be the finest quality tool chest for serious enthusiasts, this unit is constructed with 20ga 304 stainless, and features ball bearing slides, 2 gas-filled lifts. 16 gauge powder coated drawer inners with hemmed edges Top quality sealed ball bearing casters, swivel collar Tubular Cam Locks and Secure Rear-catch Locking Mechanism. Sturdy Stainless side handles welded to 11 gauge brackets. Continuous Welded Seamless Edges are Ground and Polished. Non-Slip Drawer Liners. Rugged structured inner core for side lockers / add-ons Cabinet measures: 26.5" W x 17.74" D x 21.25"H
ROLLING CAR JACK STORAGE RACK
Jack Rack - Keep valuable floor space open when not using your rolling car jacks. This rolling rack securely holds up to 4 rolling jacks.
ZoneDry MAX Moisture Absorbant-500gm
Storing your car, boat or camper for extended periods of time can invite moisture and "undo" all of the hard work you put into your project. ZoneDry will put an end to that. Designed to absorb 100% its weight in moisture and features a color indicator tab to let you know when a replacement is needed. This non-toxic, economical desiccant is designed for serious moisture absorption, and should be the last step before storing your vehicle.
Powder Coated Shop Utility Cart with Drawer
Considered to be the finest quality and strongest ready-to-assemble cart available, this unit is constructed with 16ga powder coated steel and 11ga stee legs. the cart features 120lb drawerslides, 660lb sealed swivel/locking castor secure cam lock system locks, Industrial-quality welding throughout including continuous seamless welds and smooth radiused edges for the most professional look. Includes non-slip drawer liners. Dimensions: 30" W (762mm) X 35.25" H (895mm) X 18.25" D (464mm)
Engine Case TC800
A favorite of professional engine and trans. rebuilders, these cases are constructed from high density polyethylene, permitting a more efficient and less costly way of storing and handling rebuilt engines and trans. Unit sits securely inside with snug-fit cover held in place by flexible side hooks for easy carrying. 6 separate feet provide 2-way forklift entry and stackability. Inside dimensions: 34-3/4" x 31" x 26", outside: 40-1/2"x 36-3/4" x 31". Designed for Big Block Apps. with oil pan. Must be used with proper insert to properly fit specific applications. Made in USA.
Stainless Steel Rolling Chest Combo Box-41 Inch
Considered to be the finest quality tool chest for serious enthusiasts, this combination unit is constructed with 18ga 304 stainless, and features ball bearing slides, 2 gas-filled lifts to raise top lid in 3 seconds. Tubular Cam Locks and Secure Rear-catch Locking Mechanism. Includes Non-Slip Drawer Liners. Cabinet features rugged structured inner and welded seamless ground edges. Chest measures: 40.5W x 17.74" D x 21.25"H Cabinet measures: 41" W x 18.24" D x 40.75"H
Engine Case TC630
A favorite of professional engine and transmission rebuilders, these cases are constructed from high density polyethylene, allowing for a more efficient and less costly way of storing and handling rebuilt engines and transmissions. Unit sits securely inside with snug-fit cover held in place by flexible side hooks, allowing for easy carrying. 6 separate feet provide 2-way forklift entry and stackability. Inside dimensions: 32-1/4" x 28" x 28", outside dimensions: 36-7/8" x 32" x 29". Must be used with insert 11555 to properly fit larger long block applications with oil pan. Made in USA.
Air Tool Rack
Keep your air tools organized and easy to reach! Plated steel construction securely mounts to bench, chest or wall. Holds 10 tools conveniently by the quick disconnect fitting. Allows for easy identification and oiling. Eliminates the heavy and cluttered bottom drawer of your chest! 20" long.
Stainless Rolling Modular 1 Drawer w/Sheves-30 In.
Considered to be the finest quality tool storage solution for serious enthusiasts, this one drawer mobile storage unit can be used independantly or stacked in combination. Constructed entirely of 16ga 304 stainless steel, the unit features 120lb drawerslides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial quality welding throughout. Includes cable management systema and drawer liners Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm)
Stainless Rolling Modular 2 Drawer w/Sheves-30 In.
Considered to be the finest quality tool storage solution for serious enthusiasts, this two drawer mobile storage unit can be used independantly or stacked in combination. Constructed entirely of 16ga 304 stainless steel, the unit features 120lb drawerslides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial quality welding throughout.Includes drawer liners. Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm)
Stainless Steel Rolling Modular 6 Drawer-30 Inch
Considered to be the finest quality tool storage solution for serious enthusiasts, this unit can be used independantly or stacked in combination. Constructed entirely of 16ga 304 stainless, this unit features 120lb drawer slides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial-quality welding througho Includes drawer liners. Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm).
RWD Transmission Storage/Shipping Case TC1000
A favorite of professional engine and transmission rebuilders, these cases are constructed from high density polyethylene for more efficient and less costly storing and handling rebuilt engines and transmissions. Unit sits securely inside with snug-fit cover held in place by flexible side hooks for easy carrying. 6 feet provide 2-way forklift entry and stackability. This case fits larger domestic RWD transmissions. Inside dimensions: 36" x 21" x 20-1/4", outside: 41-1/2" x 26-1/2" x 28-1/8". Made in USA.
Stainless Steel Rolling Chest-Bottom Box-30 Inch
Considered to be the finest quality tool chest for serious enthusiasts, this rolling tool cabinet is constructed with 16ga 304 stainless, and features a reinforced top that doubles as a work surface. Heavily reinforced drawers with all ball bearing glides, sealed permanently lubricaed 935lb castors, tubular cam locks, and a rugged inner structural core ensure that this unit will exhibit extreme durability. Edges are smoothed and radiused. Includes drawer liners. Cabinet measures: 30"W x 18.25"D x 40.75"H
Stainless Steel Rolling Chest Combo Box-27 Inch
Considered to be the finest quality tool chest for serious enthusiasts, this combination unit is constructed with 20ga 304 stainless, and features ball bearing slides, 2 gas-filled lifts to raise top lid in 3 seconds. Tubular Cam Locks and Secure Rear-catch Locking Mechanism. Includes Non-Slip Drawer Liners. Cabinet features rugged structured inner and welded seamless ground edges. Chest measures: 26.5" W x 17.74" D x 21.25"H Cabinet measures: 27" W x 18.24" D x 40.75"H
Engine Case - FWD Transmission and Long Block
A favorite of professional engine and transmission rebuilders, these cases are constructed from high density polyethylene, allowing for a more efficient and less costly way of storing and handling rebuilt engines and transmissions. Unit sits securely inside with snug-fit cover held in place by flexible side hooks, allowing for easy carrying. 6 separate feet provide 2-way forklift entry and ability to be stacked. Inside dimensions: 28" x 23" x 21", outside dimensions: 34" x 29" x 26-1/2". Must be used with insert 11555 properly fit 90% of domestic long block applications. Made in USA.
RWD Transmission Storage/Shipping Case TC900
A favorite of professional engine and transmission rebuilders, these cases are constructed from high density polyethylene for more efficient and less costly storing and handling rebuilt engines and transmissions. Unit sits securely inside with snug-fit cover held in place by flexible side hooks for easy carrying. 6 feet provide 2-way forklift entry and stackability. This case fits most domestic RWD transmissions except 4L80E. Inside dimensions: 30-1/2"x 21"x 20-1/4", outside: 36"x26-1/2"x28-1/8". Made in USA.
4pc Magnetic Tool Box Tray Set
4pc Magnetic Tool Box Tray Set
Powder Coat Rolling Modular 1 Dwr w/Sheves-30 In.
Considered to be the finest quality tool storage solution for serious enthusiasts, this one drawer mobile storage unit can be used independantly or stacked in combination. Constructed entirely of 16ga powder coated steel, the unit features 120lb drawerslides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial quality welding throughout. Includes cable management systema and drawer liners Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm)
Powder Coat Rolling Modular 2 Dwr w/Sheves-30 In.
Considered to be the finest quality tool storage solution for serious enthusiasts, this two drawer mobile storage unit can be used independantly or stacked in combination. Constructed entirely of 16ga powder coated steel, the unit features 120lb drawerslides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial quality welding throughout.Includes drawer liners. Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm)
Powder Coated Rolling Modular 6 Drawer-30 Inch
Considered to be the finest quality tool storage solution for serious enthusiasts, this unit can be used independantly or stacked in combination. Constructed entirely of 16ga powder coated steel, the unit features 120lb drawe slides, lockable 935lb sealed castors, welded side handles, secure cam lock system locks all drawers and cabinet doors, Industrial-quality welding througho Includes drawer liners. Dimensions: 30"w (762mm) x 32"H (851mm) x 26"D (660mm)
Powder Coated Rolling Chest-Bottom Box-30 Inch
Considered to be the finest quality tool chest for serious enthusiasts, this rolling tool cabinet is constructed with 16ga powder coated steel, and features a reinforced top that doubles as a work surface. Heavily reinforced drawers with all ball bearing glides, sealed permanently lubricaed 935lb castors, tubular cam locks, and a rugged inner structural core ensure that this unit wil exhibit extreme durability. Edges are smoothed and radiused. Includes drawer liners. Cabinet measures: 30"W x 18.25"D x 40.75"H
Stainless Steel Tool Top Box Chest - 41 Inch
Considered to be the finest quality tool chest for serious enthusiasts, this unit is constructed with 18ga 304 stainless, and features ball bearing slides, 2 gas-filled lifts to raise top lid in 3 seconds. Tubular Cam Locks and Secure Rear-catch Locking Mechanism. Includes Non-Slip Drawer Liners. Utilizes a rugged structured inner core to accommodate side lockers and add-ons Chest measures: 40.5W x 17.74" D x 21.25"H
Stainless Steel Shop Utility Cart with Drawer
Considered to be the finest quality and strongest ready-to-assemble cart available, this unit is constructed with 16ga 304 stainless steel and 11ga stee legs. the cart features 120lb drawerslides, 660lb sealed swivel/locking castor secure cam lock system locks, Industrial-quality welding throughout including continuous seamless welds and smooth radiused edges for the most professional look. Includes non-slip drawer liners. Dimensions: 30" W (762mm) X 35.25" H (895mm) X 18.25" D (464mm)
|