|
Viewing Auto Body >> Panel Repair and Prep >> Sanding, Grinding and Filling Guide Coat Black Aerosol 12 oz
Is the Primer Smooth? Guide Coat highlights low areas in primers when block sanding. Just spray a light coat over the cured primer and block sand until the Guide Coat is completely sanded away. One 12oz. net wt aerosol provides enough product to lightly coat over 30 square feet.
File Holder For Half Round Body File
This is a solid maple file holder.
Board Sander Kit Set Of Three
Great for all-around sanding. The backing plates are nearly 1/8" thick and the workface is 2 3/4" wide.
HAV-501 Air Adjusting Valve w/gauge
Devilbiss HAV-501 Air Adjusting Valve w/Gauge - This restricter valve adjusts gun air supply. Gauge calibrated from 0-160 PSI. 1/4" NPT male inlet thread. 1/4" NPT female outlet thread.
Metal To Metal Filler Hardener
Metal To Metal Filler Hardener
Sander Flexible Board
Smooth rounded surfaces evenly. Face measures 2 3/4" wide by 16" long.
Sander Half Sheet
Great for larger, flat areas like trunk lids and hoods. Face measures 4 1/2" wide by 9 3/8" long.
Dewalt 1000/3000RPM 7"& 9" Buffmaster Polisher
Buff Out Finishes Like A Pro - The DeWalt model DWT-DW849 7"/9" Buffmaster Electronic Polisher offers variable speed from 1000-3000 rpm. Perfect for most grinding and buffing operations. The heat treated gears offer long quiet running. Safety-lock trigger with removable handle adds comfort and convenience Draws 8.0 amps at 120 VAC.
Carbide Burr SL-3 3/8X1-1/16X1/4 Dbl Cone
This cone shaped carbide burr measures about 3" overall and has a 1/4" shaft. Use this burr for working with Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.
|