|
Viewing Performance and Tune Up >> Drivetrain >> Porting and Grinding Carbide Bead Burr 6 Inches Long Set Of 4
Super-hard carbide burrs used in a high-speed die grinder can really make a tough job easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. All burrs have a 1/4" dia. shank. Burr sets include: cylinder, pointed tree shaped and round nose. Individual burrs are available separately. Use these above burrs for Steel and Iron. Use (46060) 6" Tree Shaped Burr for Aluminum.
Mini Die Grinder With Porting Kit
The porting kit contains 80 grit abrasive rolls: 20 tapers for reaching into tight spots and 20 cylinders for flatter areas, two 4" and two 6" mandrels, and complete illustrated instructions. For best results, use a high-speed grinder. To remove more material, try the carbide burrs (max. speed 22,000 rpm).
Carbide Burr Set Of Four
Super-hard Carbide Burrs used in a high-speed die grinder can really make tough jobs easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. All burrs have a 1/4" dia. shank. Burr sets include: cylinder pointed, tree-shaped and rounded nose. Individual burrs are tree-shaped. All 2-1/2" - 3" Carbide Burrs are individually packaged. Most commonly used on Steel and Iron. Use (46029) for a Tree Shaped Burr for Aluminum.
Deluxe Manifold Smoothing Kit
The easy way to restore that showroom appearance to old or neglected cast iron manifolds, these kits are used with your high-speed die grinder to level rusted, pitted surfaces. The Standard Kit consists of twenty 80 grit abrasive cylinders and ten each of grit tapers, 120 grit cylinders and 120 grit tapers. Two mandrels are also included. THe Deluxe kit adds a carbide bead burr for faster cutting, to remove casting flash or shape the metal for a custom look. After the metal is smoothed, apply one of our high temperature coatings: your rust-prone manifold will keep that brand new look for years! Instructions incl.
Mini Die Grinder
This Grinder packs a 22,000 rpm punch. Perfect for porting or detail polishing on cars, boats, aircraft, model buildings, etc. 6" long and equipped with a 1/4" collet. Uses 4 cfm @ 90psi. One year warranty. Imported.
Standard Manifold Smoothing Kit
The easy way to restore that showroom appearance to old or neglected cast iron manifolds, these kits are used with your high-speed die grinder to level rusted pitted surfaces. The Standard Kit consists of twenty 80 grit abrasive cylinders and ten each of 80 grit tapers, 120 grit cylinders and 120 grit tapers. Two mandrels are also included. The Deluxe kit adds a carbide bead burr for faster cutting, to remove casting flash or shape the metal for a custom look. After metal is smoothed, apply one of our high temp. coatings. Your rust-prone manifold will keep that new look for years. Instructions incl.
Carbide Burr SF5L6 Tree Shaped 6"
Use this long bead burr on steel and cast iron to quickly shape and remove casting flash. Works best in air die grinders with light side pressure. Use 80 Grit Abrasive Rolls available in cylinders (13091A) and tapers (13090A) to smooth away marks from the burr. Use (46060) 6" Tree Shaped Burr for working with Aluminum.
Carbide Radius End Burr SC3L6 3/8x3/4 6"dbl
This round nosed carbide burr measures about 6" long with a 1/4" shank.
Carbide Burr GL3L6 Tapered Cone 3/8 EndRadius
This carbide cone shaped burr measures about 6" with a 1/4" shank. Use this burr for working with Steel and Iron. Use (46060) 6" Tree Shaped Burr for working with Aluminum.
Gasket Cleaning Pads pack of 20
Gasket Cleaning Pads pack of 20
Carbide Burr SA1L6 Cylindrical 6"
This 1/4" carbide cylinder burr measures about 6" long with 1/4" shank. Use this burr for working with Steel and Iron. Use (46060) 6" Tree Shaped Burr for working with Aluminum.
Carbide Burr SC3L Re 3/8X1X1/4 Dbl Round
This rounded end burr measures about 3" long with a 1/4" shaft. Use this burr for working with Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.
Carbide Burr SF-5 Tree Shaped
Super-hard carbide burrs used in a high-speed die grinder can really make tough jobs easier. Grind weld beads, shape parts, smooth rough castings, port cylinder heads. All burrs have a 1/4" dia. shank. This burr is for use on Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.
Carbide Burr SA-1 1/4X5/8X1/4 dbl Cylinder
This 1/4" diameter cylindrical carbide burr measures about 3" long and fits 1/4" collets. This burr is for use on Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.
|