|
Abrasive Blasting
Auto Accessories and Gifts
Auto Body
Brakes and Suspension
category
Engine and Drivetrain
HotCoat Powder Coating
Metal Buffing and Finishing
Metal Forming
Metal Shop
Painting and Pinstriping
Performance and Tune Up
Rust Treatment
Specialty Coatings
Painting
Detail Coatings
Wheel and Suspension Coatings
Underhood Coatings
Engine Paints
Metal Finishes
Gas Tank Sealers and Fuel Systems
Clears
High Temp and Exhaust Systems
Cadmium Coatings
Radiator Paint
Underhood Black
Specialty Paints and Coatings
Styling and Custom
Tools and Equipment
|
Viewing Specialty Coatings >> Underhood Coatings >> Metal Finishes EW Aluma Blast Paint Aerosol 12 oz
Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings. Buy 3 or more, mix and match, and SAVE!
EW Detail Gray Paint Aerosol 13 oz
This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on alternator and distributor housings. Buy 3 or more, mix and match, and SAVE!
EW Spray Gray Detail Paint Aerosol 12 oz
Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron parts on your car. Protected up to 250 degrees F by this paint, metal parts on your car will keep that brand new look for a long time. Available in aerosol and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on cast iron water pumps, intake manifolds, master cylinders and more. Buy 3 or more, mix and match, and SAVE!
Detail Paint Set Of 3 Qrt
These Detail Paints are specially formulated to duplicate the original look of many metal parts on your car. Protected up to 300 degrees by these paints, metal parts will keep that brand new look for a long time. Available in aerosol and quarts (quarts offer the greater value. Thin 10-20% with lacquer thinner or Xylene before spraying). Detail Gray for stamped or machine steel, rough cast aluminum and pot metal; Aluma Blast for smooth cast aluminum components; and Spray Gray protects cast iron parts.
Detail Paint Set 3 Cans
These paints are formulated to protect and duplicate the original look of many metal parts on your car. Detail Gray is used for stamped or machined steel, rough cast aluminum and pot metal. Also for die-cast parts like alternator and distributor housings. Aluma Blast provides protection and durable finish for smooth-cast aluminum components. Spray Gray protects cast iron parts and maintains their fresh cast factory appearance. Protected up to 300 degrees by these paints, metal parts will keep that brand new look for a long time.
EW Aluma Blast Detail Paint Quart
Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings. Buy 3 or more, mix and match, and SAVE!
EW Detail Gray Paint Quart
This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on alternator and distributor housings. Buy 3 or more, mix and match, and SAVE!
EW Spray Gray Detail Paint Quart
Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron parts on your car. Protected up to 250 degrees F by this paint, metal parts on your car will keep that brand new look for a long time. Available in aerosol and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on cast iron water pumps, intake manifolds, master cylinders and more. Buy 3 or more, mix and match, and SAVE!
EW Diamond Clear Gloss Bare Metal Aero. 12 oz
Protect metal parts with a crystal clear, tough, flexible coating that keeps brass, aluminum, steel, die-cast, even cast iron looking great. This self- leveling formulation, resists chips, cracks, fading and yellowing. May slightly dull reflectivity. Resists fuels and temps up to 300 degrees. Ideal in underhood applications except exhaust manifolds. Great for polished wheels, aluminum valve covers as well as items around the shop and home. Diamond Clear for Bare Metal is a solvent-based clear in a 12 oz aer. can. Assure surface is grease and oil free with PRE Painting Prep (10041Z).
EW Ticoat 47 Titanium Finish
New High-Tech Titanium Finish: TiCoat47 adds a hi-tech look. Dress up engine, suspension, transmission, and brake components. TiCoat47 is an acrylic enamel formulated to offer durablity with fuel and heat resistant to 300 degrees F. Suitable for most underhood components except exhaust manifolds and headers. Natural 20-30% gloss Satin Finish resembles pure titanium metal. One 12 oz net wt. can covers 6 sq.ft.
|