|
Viewing Tools and Equipment >> Shop Equipment >> Jacks and Lifts Universal Lift Support Clamp
Clamp fits most gas struts to keep hoods, hatches and trunk lids in place.
Go Jak 1,500 lb rolling Jack Set of 4
These innovative "car dollies" require no floor jack for operation. Simply slip unit around tire, pump the lifting lever to gently squeeze the tire between its two rollers lifting the wheels from the ground. Available in 1250lb. capacity for up to 9" wide wheels and 1500lb. capacity for up to 13" wide wheels. Easily maneuvered in any position with large 4" metal casters. Ratchet mechanically locks Car Jack in the raised position, eliminating any hydraulic bleed down or leaks. Optional storage rack to hold units when not in use.****10 DAYS TO 2 WEEKS DELIVERY**** HEAVY SHIPPING CHARGES APPLY****
High Lift 3 Bag Air Jack 4500 Lb Capacity
Air Bag Jack, High Lift 3 Bag - Inflatable air bag jack is reqires only 3" making it perfect for low-clearance cars while providing a lifting range of 5-7/8" to 17-3/4". Portable, fast and easy to use with a 4500lb. capacity. Simple and reliable design with Valves allow jack to remain inflated after air supply has been disconnected. Functions on 100 PSI min. / 120 PSI max. Made in USA
1200lb Hydraulic Transmission Service Jack
Designed with the shop professional in mind, this complete transmission jack has a full 1,200lb capacity and will lift to a maximum height of 31-1/2in. Overall length is 36-3/4 inches with a width of 18-1/2 inches. Features adjustable corner brackets, swivel casters and safety bypass system to prevent hydraulic cylinder damage.
Low Profile Air Bag Jack 4500 Lb Capacity
Air Bag Jack, 2 Bag - Inflatable air bag jack is reqires only 3" making it perfect for low-clearance cars while providing a lifting range of 4-7/8" to 12-1/4". Portable, fast and easy to use with a 4500lb. capacity. Simple and reliable design with Valves allow jack to remain inflated after air supply has been disconnected. Functions on 100 PSI min. / 120 PSI max. Imported
Rolling Car Jack Set Of 2 1500 lb
These innovative "car dollies" require no floor jack for operation. Simply slip unit around tire, pump the lifting lever to gently squeeze the tire between its two rollers lifting the wheels from the ground. Available in 1250lb. capacity for up to 9" wide wheels and 1500lb. capacity for up to 13" wide wheels. Easily maneuvered in any position with large 4" metal casters. Ratchet mechanically locks Car Jack in the raised position, eliminating any hydraulic bleed down or leaks. Handy storage rack holds units when not in use. ****10 DAYS TO 2 WEEKS DELIVERY**** HEAVY SHIPPING CHARGES APPLY****
Tire Lift and Caddy 14-19in Wheels
Remove or install wheels without lifting. Easily slides under any 14" to 19" wheel with vehicle jacked up. Lifts wheel off and onto hub. Steel pins in tubing keep tire from sliding off. Steel wheel roller bearings for easy transport. Handle stores inside frame for compact storage.
Rolling Car Jack 1250 lb set of 2
These innovative "car dollies" require no floor jack for operation. Simply slip unit around tire, pump the lifting lever to gently squeeze the tire between its two rollers lifting the wheels from the ground. This 1250lb. dolly lifts up to 9" wide wheels. Easily maneuvered in any position with large 4" metal casters. Ratchet mechanically locks Car Jack in the raised position, eliminating any hydraulic bleed down or leaks. Handy storage rack (43182) holds units when not in use. ****10 DAYS TO 2 WEEKS DELIVERY**** HEAVY SHIPPING CHARGES APPLY****
Wheel Chock
Wheel Chock - For trailer, shop, truck or anywhere you need to secure your bike. Bike is held in a vertical position by locking either front or rear tire, simply roll bike into chock and secure by tightening the hand wheel. Constructed from 7ga steel plate, 3/4" alignment shafts and a precision acme lead screw. Holds any bike with tires up to 12" wide securely and safely. Mounting slots are provided in base to accommodate any type installation. Made in USA. Two year Mfg. Warranty.
Heavy Duty 3 Ton Jack Stands
Heavy-Duty 3 Ton Jack Stands Set of 2 The last thing you want to do is get under a car supported by inferior jack stands. Here are some quality features you can put your trust in: Welded steel construction for maximum strength and durability. Four leg formed steel base measures 6 3/4" by 7 3/4" for stability and support. Safety ratchet design assures stand remains locked under load. Solid cast column and saddle for superior strength. Height adjusts from 11 1/2" to 17". Dual purpose column release and carrying handle. The Jack Stands are a heavy weight ship item. Call 800-345-1178 for details.
2 Ton Low Profile Forge-Tough Floor Jack
Whether the vehicle is a low profile Tuner car, a race car or a street machine with limited clearance, this is the problem solver jack. Requires only 2-3/4in clearance, and will lift up to 20 inches. Features highly controlled release with universal joint controlled precision valve. Safety valve provides overload protection. One piece foam covered 50in long handle for maximum leverage. Wide stable stance with thick flanged side plates for increased strength and stability.
Urethane Jackpad Cover-Floor Jack-Up to 5.75-7.0in
Slip-On Round Jack Pad - Just slip this on your 5-3/4" to 7" metal jack pad to prevent scratching the frame on your car. No need to remove existing metal pad. Made of durable urethane to conform to irregular surfaces without damage.
Soft Lifter Jack Pad
Soft Lifter. Protect under-carriages by replacing the saddle on 2, 2 1/4, and 2 1/2 ton floor jacks. This rubber pad (5"x 5") will protect the painted or detailed undercarriage of your special auto. For most jacks with a 1 3/16" center post. Requires 2" deep hole to accommodate long mounting stud on pad. imported.
3 Ton Floor Jack w/Magic Lift
3 Ton Floor Jack with Quick Lift Pedal This heavy-duty jack boasts such features as: Exclusive quick lift pedal for fast jack alignment. Alloy plated ram resists corrosion. U-joint style release mechanism for smoother lowering. Roller-cam plunger assembly reduces wear and prevents side loading while raising vehicle. Double-sealed hydraulics with safety overload valve. Heavy steel construction with flanged side plates for increased strength. The 3 Ton Floor Jack is a heavy weight ship item. Call 800-345-1178 for details
1250 lb Non-Folding Engine stand
***PLEASE BE ADVISED-THIS IS NO LONGER A "FOLDING" ENGINE STAND. CAPACITY IS" ONLY 1250 LBS, NOT 2000 (1 TON) fold up to conseerve space. Neck is reinforced to increase strength and eliminate flex. Long rubber-grip handle for easy smooth positioning. Head swivels 360 degrees for full access to every part of your engine. Adjustable slotted mounting arms permit easy installation on a wide variety of engines, including straight 6 and straight 8 engines.
|