Abrasive Blasting
Auto Accessories and Gifts
Auto Body
Brakes and Suspension
category
Engine and Drivetrain
HotCoat Powder Coating
  Powders
  Powder Coating Equipment
  Metal Prep
      Chemical Prep
Metal Buffing and Finishing
Metal Forming
Metal Shop
Painting and Pinstriping
Performance and Tune Up
Rust Treatment
Specialty Coatings
Specialty Paints and Coatings
Styling and Custom
Tools and Equipment

Viewing HotCoat Powder Coating >> Metal Prep >> Chemical Prep

Metal Wash 7 oz

Promote topcoat adhesion on bare metal. Metal Wash cleans and protects in one quick step without using harsh or flammable solvents. This non-toxic compound removes grease, oily preservatives and contaminants, leaving behind corrosion inhibitors that prevent flash rusting for up to 3 weeks and promotes adhesion of paints and powder coatings. Ideal for the preparation of any base metal, including freshly abrasive blasted parts (even after blasting, surface contaminants remain). Economical to use, metal wash is a dry compound that can be mixed with hot water in whatever quantity is needed (makes 7 quarts).

EW Rust Dissolver Gallon

The safer, acid free rust remover. Removes rust, not metal. Leaves metal clean and ready to paint, plate or powder coat. Suitable for engine parts. Will not harm copper, brass, aluminum, solder, lead, plastic, rubber, seals, wood or vinyl. Will not remove sound paint or chrome. Removes blueing and other oxide coatings. Works as long as surface remains wet. Derust small parts in a plastic container larger parts can be placed in the discharge stream of a small pump. Virtually any plastic pump will work. Irrigation hose can be used to assure complete coverage. One gallon derusts about 20 square feet.

EW Pre Painting Prep Aerosol 11oz

Proper surface preparation is one of the most important factors in achieving a quality finish. This specially formulated PRE Painting Prep removes dirt, wax, polish, grease, silicone, buffing compound, even road tar - ensuring a clean surface. Very easy to use: just spray it on and wipe it off. Works better than lacquer thinner, which can leave a thin residue on the surface and possibly interfere with paint adhesion. Buy 3 or more and SAVE!