|
Viewing Tools and Equipment >> Shop Tools >> Brake Tools Seal Puller
Removing an inexpensive seal can often result in expensive damage if the wrong tools are used. Many areas such as wheel bearing seals, automatic transmission pumps, tailshaft housing, and other parts, especially those made of light alloy, are too delicate for rough handling. Stop pounding out seals with bent screwdrivers - get the right tool. Simply insert the tip behind the seal, press and pull. Leverage pops out the seal every time.
Tubing Bender Rolling
For smaller diameter (3/16" and 1/4" O.D.) coated tubing, use the rolling action tubing bender. It utilizes a free-rolling follower CAM to minimize stretching and distortion when bending tubing. This produces uniform, distortion-free, tight, 180 bends down to a 1" radius. Will not harm protective surface coatings on fuel and brake lines. Comes apart for easy placement over long pieces of tubing. For bench use, a tab is provided on the lower handle.
Brake Drum Remover
Remove frozen brake drums without damaging the drum! Just tap lightly with hammer on jaw ends to release drum. Not to be used as a "puller".
Tubing Bender Heavy Duty
For larger diameter tubing (5/16" and 3/8" O.D.) use the heavy-duty tubing bender, which will bend thick-walled tubing easily. Comes apart for easy placement over long pieces of tubing. Free-rolling CAM principle minimizes stretching and distortion. Will not harm protective surface coatings on fuel and brake liens. Made in England.
Tubing Flaring Tool 1/2" Adapter
Tubing Flaring Tool 1/2" Adapter
Triple Head 180deg Tubing bender 3/16-3/8in
Triple Head 180³ Tubing Bender. Ideal for brake, AC, fuel and transmission lines. Bends 3/16", 1/4", 5/16" and 3/8" tubing. Make smooth, tight 180³ bends with less effort and improved control. Patented Roto-lokTM handle quickly repositions for maximum leverage. Eliminates crossing of handles. Complete with cushion grips for comfort and stability. Made of lightweight, die-cast aluminium. Imported
Dial Indicator and Magnetic Base Kit
Check runout, out of round conditions on wheel rims, brake discs, pulleys and more. Non-marring magnetic base holds dial indicator securely during use. On/off magnetic release. 150 lb holding power. Fully adjustable arm allows for measurements in a number of different positions. Delivers precise readings to.001 of an inch. Meets or exceeds AGD and Federal specifications. Bezel adjusts 360 degrees. Dial face reads from 0-100 and 0-50-0.
Flare Pro 4 in 1 Flaring and Swaging Tool
Imperial Flare Pro - Produces single flares 45 & 37 degrees in soft metal & stainless steel lines 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8",& 3/4". Produces 45 degree double flares in soft metal & steel (Bundy or G.M. to.035" wall) lines 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", & 3/4". Swages (enlarges, aluminum/copper so one fits inside the other) lines for HVAC/coolant.Hardened yoke holds sized dies for a secure grip. Includes yoke, reversing 3/8" ratchet, 1/4" hex drive, double flare dies, clamping jaws, 37 & 45 degree cones & instructions in a molded case. Ltd. lifetime man. warr. Made in the USA
EW Brake Forming Tool Pliers
Brake Line Bender - Align, bend, and adjust, 3/16" and 1/4" brake and fuel lines with a twist of the wrist. Whether fitting new hard lines or decreasing the bend radius next to a fitting, this tool is indispensable. 9" long forged tool with vinyl grips. Shaped jaws bend tubing without distortion. Imported.
Tubing Flaring Tool 3/16" Adapter
Tubing Flaring Tool 3/16" Adapter
Tubing Flaring Tool 5/16" Adapter
Tubing Flaring Tool 5/16" Adapter
1in Dial Indicator
Delivers precise readings to.001 of an inch. Meets or exceeds AGD and Federal specifications. Bezel adjusts 360 degrees. Dial face reads from 0-100 and 0-50-0.
3-in-1 Precision Tubing Bender 5- 8- 10mm
Producing precision bends in small diameter tubing can be difficult. This three-in-one tool accommodates 6, 8 and 10mm OD tubing (1/4", 5/16" and 3/8"). All metal body incorporates easy to read scale on the side to accurately produce or reproduce tubing bends with exacting precision. The handle also articulates to allow for production of a full 180 degree bend with one hand motion. Imported.
Tubing Bender Set Rolling And Heavy Duty
Here are 2 essential tools when forming coated tubing: rolling action tubing bender (3/16" and 1/4" O.D.) and heavy-duty tubing bender (5/16" and 3/8" O.D.) for thick walled tubing. Both utilize a free-rolling follower CAM to minimize stretching and distortion. Will not harm protective surface coating on fuel and brake lines. Comes apart easily for easy placement over long pieces of tubing. Made in England.
|