|
Viewing HotCoat Powder Coating >> Powder Coating Equipment - Powder Coating Accessories -Booths -Powder Coat Guns -IR Lights -HCP Large Benchtop Powder Booth & Stand
Our large Bench-Top powder booth is a complete open-faced spray system. This booth features 18 gauge galvanized construction, a 3 stage filter panel, including exhaust filters and grids, powder coat pocket filters and final stage filters for non-vented exhaust. Over sprayed powder collects on the primary filters until full, then filters are replaced. This booth is shipped assembled. The included stand is shipped assembled, measures 36" high, and features all welded 1-1/2" angle iron construction.
Hotcoat Pro Deluxe Kit
HotCoat PRO Deluxe Kit - Save $56.81 over individual pricing with this kit! This kit includes the HotCoat PRO Gun (58100), 2 lbs. of High Gloss Black Powder (10107), a 20 fluid oz. pump spray bottle of Oxisolv Rust Remover (16026), a 7 oz. net wt. can of Metal Wash (10120), the 110 piece assortment of High Temp Silicone Caps and Plugs (58041), a 1/2" and 1" roll of High Temp Masking Tape (10027 and 10115 respectively), a 1 lb. spool of Stainless Steel Wire (43045), Set of 3 Gun Cups and Lids (58101), and a Disposable Moisture Filter (34066), and PRE Painting Prep (10041Z). GROUND SHIPPABLE ONLY !!
HCP Small Benchtop Powder Booth And Stand
Our Bench-Top powder booths are complete open-faced spray systems. Features 18 gauge galvanized construction, a 3 stage filter panel, including exhaust filter and grids,powder coat pocket filters and final stage filters for non-vented exhaust. Over sprayed powder collects on the primary filters until full, then filters are replaced. The stand features all welded 1-1/2" angle iron construction at a comfortable 36" height. Only minor assembly required. Please see the Standard Tools Ship Chart for Shipping Charges for this item.
Hotcoat Masking Kit
Masking Kit - This kit includes a roll of 1" High Temp Masking Tape (10115), a roll of 1/2" High Temp Masking Tape (10027) and 110 piece set of High Temp Silicone Caps & Plugs (58041).
Hotcoat High Performance Deflector
The Performance Deflector offers better transfer efficiency by focusing the powder into a tighter pattern. Sutable for general coating purposes.
Silicone Cap & Plug Kit
Assorted Reusable Silicone Caps and Plugs - Prevent powder build-up in critical tolerance areas like threaded holes, studs and more. Silicone caps and plugs are reuseable because cured powder rolls right off. This kit includes over 150 caps and over 150 plugs. Caps range in size from.040"ID to.295"ID. Plugs range in size from.062" to.896" diameter. Reuseable storage boxes included. Made in the USA.
High Temp Silicone Plugs 1/2 - 11/16 10/pack
Silicone Plugs - This pack of 10 high temp silicone plugs fit holes from 1/2"- 11/16". Plugs are reusable.
High Temp Silicone Plugs 1/4 - 7/16 10/pack
Silicone Plugs - This pack of 10 high temp silicone plugs fit holes from 1/4"- 7/16". Plugs are reusable.
High Temp Silicone Plugs 1/8 - 1/4 10/pack
Silicone Plugs - This pack of 10 high temp silicone plugs fit holes from 1/8"- 1/4". Plugs are reusable.
High Temp Silicone Plugs 3/4 - 1" 10/pack
Silicone Plugs - This pack of 10 high temp silicone plugs fit holes from 3/4"- 1". Plugs are reusable.
High Temp Silicone Plugs 3/8 - 9/16 10/pack
Silicone Plugs - This pack of 10 high temp silicone plugs fit holes from 3/8"- 9/16". Plugs are reusable.
Hi-Temp Lab Metal 24 oz
Hi-Temp Lab-metal withstands 1000 degrees F. If hi-temp leveling or filling is needed this is the product to use. Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425³ F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz.
High Temp Masking Tape Kit 6 Rolls Blue
High Performance Blue Tape - Use this tape for masking where a fine parting line is desired. Unlike fiberglass tape, this tape is fiber free. This kit includes 1/8", 1/4", 1/2", 3/4", 1" and 2" rolls measuring 72 yards long. Perfect for masking tight radius curves when powder coating or painting. Temperature resistant to 500 degrees F continuously and will not shrink on preheated parts.
Hotcoat Accessories Kit
We have put together a kit of the most popular HotCoat upgrade accessories plus a Free Roll of High Temperature Masking Tape. The kit includes: Mini Regulator (34087)-Mounts directly on your HotCoat gun for quick, precise adjustments of air pressure. Performance Deflector (10128)-Used for coating large areas quickly with greatly improved transfer efficiency. Set of 3 Gun Cup Bottles (10198ACB)-For storage of powder and fast color changes. Disposable Moisture Filter (34006)-Dry clean air is important for powder coating finishes. Free! High Temp Tape 1/2" (10027)-36 yards of special fiberglass tape for masking.
High Temp Silicone Caps And Plugs Kit 110 pc
Silicone Caps/Plugs Set, 110 Pcs - This set includes 10 each of the 11 different sizes of silicone caps and plugs we sell. Plugs are reusable and easily cleaned by rolling the plug between your fingers.
Silicone Pull Plug KIT.062"-.809" O.D.150 pc
Assorted Reusable Silicone Plugs - Prevent powder build-up in critical tolerance areas like threaded holes and more. Silicone plugs are reuseable because cured powder rolls right off. This kit includes over 150 plugs. Plugs range in size from.062" to.896" diameter. Reuseable storage box included. Made in the USA.
Infrared Replacement Element
This 600 watt element is used to replace any burned out elements in the Infrared Cure System.
Mini Regulator 60 psi
This compact unit makes it easy to adjust and maintain line pressure with accuracy, especially at the lower values used today. Great for HVLP paint guns or HotCoat Powder Coating System. The diaphram type regulator features a 0-60 psi/400 kpa gauge and 1/4" NPT ports. Handles up to 250 psi.
Lab Metal Tube 20 oz
Now Lab Metal is available in a convenient 20 oz. caulk tube. No mixing required with this easy to use format. This is the same metal-reinforced leveling agent as the popular (10207Z) Lab Metal. Use a body filler spreader dipped in Lab Solvent (10208ZP) for a smooth surface.
Hotcoat Powder Prep Sampler Kit
Prep Sampler Kit - A clean metal surface is the foundation for a durable finish. The items in this kit will help assure the parts you coat are free of rust, grease, oil, wax, and silicones. This kit includes a 20 fluid oz. spray bottle of Oxisolv Rust Remover (16026), a 7 oz net wt. can of Metal Wash (10120), and an 11 oz. net wt. Aerosol can of PRE Painting Prep at a savings of $5.98 over individual prices.
Hotcoat EZ Coat Rack
Powder Racks - Decrease coating time. Increase powder transfer efficiency. Easily assembled and customized to fit a wide range of parts and oven sizes. Constructed from heavy gauge metal. Parts hanging hooks not included. A pack of 20 hooks (58111) is available. Made in the USA.
High Temperature Fiberglass Masking Tape 1"
36 yards of fiberglass tape that can withstand high cure temperatures.
High Temp Silicone Caps 0.109" 10/pack
Silicone Caps - Protect threaded studs from powder build up with this pack of ten 7/64" ID (.109") silicone caps.
High Temp Silicone Caps 0.140" 10/pack
Silicone Caps - This pack of 10 silicone caps have a 9/64" ID (.140").
High Temp Silicone Caps 0.172" 10/pack
Silicone Caps - This pack of 10 silicone caps have a 11/64"ID (.172").
|