|
Viewing Metal Shop - Welding -Fabrication -Protective Gear -Bending -30" Mighty Brute Bending Brake
Sheet Metal Bending Brake - Perfect for fabricating small to large patch panels! The 30" brake bends up to 16 gauge aluminum, 18 gauge steel, heavier gauges in narrower widths. Mounting holes to bolt to your workbench. Made in the USA.
Bead Roller Shearing Mandrel
Bead Roller Shearing Mandrel
EW Variable Height Tool Stand
Variable Height Tool Stand - Mounting tools at the right height makes tools work better. Features a strong pre slotted 12" square 0.200" thick top plate, 4-point gusseted base and 3 point height locking bolts. Adjusts from a 24" to 42" for the ideal working level. Ideal support for buff motors, Shrinker/Stretcher, interchangeable English Wheel/Planishing Hammer, metal shear, bench top drill press and more. May be filled with sand to absorb unwanted noise and vibrations. Bolting to floor recommended. Imported.
Heavy Duty Metal Bender
Heavy Duty Metal Bender - Form bumper and fender brackets, ornamental ironwork, and more. Bends 5/16" x 1-1/4" or 1-1/4" x 2" mild steel and 5/8" round or square rod. Includes 44" telescoping handle, 7 dies (1", 1-1/4", 1-1/2", 1-3/4" 2", 2-1/2", 3"), 1 right angle die, and complete instructions. Stands 34" high. Imported.
Panel Beater Bag Stand
Sturdy steel construction with cast iron top & base and seamless tubing post. Fits panel beater bags up to 12". Overall height: 34", 12-3/4" top diameter. Weighs 32 pounds ships UPS.
Pre-cut.063" alum. 5-gauge universal dash panel
This dash is a universal hot rod dash. Pattern uses 1/2" swirl on.063" aluminum. Center speedometer hole 3 3/8" with four holes 2 1/16" for additional gauges. Size approximately 5 1/4" tall and 15 1/2" long.
Pre-cut.063" alum. 5-gauge universal dash panel
This syle dash is a universal hot rod dash. Pattern uses 1/2" swirl on.063" aluminum. Left side speedometer hole 3 3/8" with four holes 2 1/16" for additional gauges. Size approximately 5 1/4" tall and 15 1/2" long.
Rectangular Hole Punch 21/32"x15/16"
Rectangular Hole Punch 21/32"x15/16"
Roll Set - 1" Standard Round - Steel
This bead roll set is designed to work with any of the power driven bead rollers, and is exactingly machined from heat treated steel. This roll set is considered to be a 1" Standard Round Roll Set. Made in USA.
Roll Set - Shear Rolls
This bead roll set is designed to work with any of the power driven bead rollers, and is exactingly machined from heat treated steel. This roll set is considered to be a Shear Roll design. Made in USA.
Rotabroach Cutter Kit Small
Cut precise, burr-free holes through sheet metal, plate and plastic up to ÷" thick 3 times faster than hole saws or drills. Precision ground M2 high speed steel lasts 10 times longer than hole saws. Requires a 3/8" or larger chuck. Includes 5/16",3/8",7/16", 1/2", 9/16",5/8" & õ" cutters, 3/8" non-slip arbor, hex wrench, center punch, extra pilot, rugged plastic case and complete instructions. Made in USA.
Stand for 24" Bead Roller
This stand has application to the 24" throat depth power bead roller. It is constructed from heavy 2" square steel tube, and is powder coated blue so as to match the bead roller. Stand provides a very sturdy cradle mount for the bead roller and attaches with countersunk hex fasteners (included). Stand is gussetted to ensure virtually flex-free operation. Made in USA.
Resistance Spot Welder 18 Inch Tongs
18" Accessory Tongs.
5/pk 32 Tooth Reciprocating Saw Blades for 43377
5/pk 32 Tooth Reciprocating Saw Blades for 43377
Drill Nibbler Replacement Die
Drill Nibbler Replacement Die
Drill Nibbler Replacement Punch pack/2
Pack of 2 hardened steel punches.
Flexible Edge Steel Strip 24 gauge
Flex edge for making inside and outside curves. Great for wheel openings and body curves. 3/4" x 3/4" x 36" long. 24 gauge steel.
Hard Copper Rectangle
Fill Holes in Sheet Metal Without Burn-Through - The rectangular copper paddle measures 1 5/16" wide by 6 1/8" long. This flat copper plate is clamped onto the metal and then welded from the other side. Weld deposited metal will not stick to the copper while the copper absorbs heat and prevents burn through.
Magnetic Carbide Tip Scriber
Magnetic Carbide Tip Scriber
Mig Welding Wire Aluminum.030 1 lb
One 1 lb spool of.030" Aluminum wire type ER4043.
Mini Anvil
The perfect size for intricate trim restoration when a full-sized anvil is too big for the work piece. This is not a toy, but a scaled-down version of a full-sized anvil. It weighs 1 1/2 pounds and measures approximately 2 1/2" H x 1 5/8" W x 5 1/8" L, making it easy to store on a shelf.
Mini Nibbler Replacement Die Set For 6291
Replacement Die for Mini Nibbler.
Nu-Tecsys Plasma Cutter Replacement Nozzle
Nu-Tecsys Plasma Cutter Replacement Nozzle
Welding Rod Keeper
The Weld Rod Keeper keeps weld rods dry.
Resistance Spot Welder 8 Inch Tongs
One pair 8" tongs.
|